1. KMA, flanged and angled mounting brackets available
2. Combinations of varying bending radii and moving axes
3. Completely enclosed4. Protection against dirt and chips
5. Cost efficient design for complex movements
6. Assembling and separating at any given point
7. High tensile strength
** The calculated length corresponds to the chain length without mounting brackets.
Travel: SPitch: 1.18 (30 mm)links per ft: 11 (1.08 ft)(34/m (1020 mm))Dimensions E: 0.98 (25 mm)Ba: 2.68 (68 mm)Chain length: S/2 + K
Dependency of the unsupported length on the additional load X axis: Unsupported length in ft FLB/FLG Y axis: Additional load in lbs/ft Lower scale: travel S in ft FLB = Unsupported with allowed sag FLG = Unsupported with straight upper run
Note: Unsupported lengths for single-axis movement only!
Samples and catalog order
E-Chain® Expert call
Service life calculation
E-Chain® product finder
Ask the product expert
Designing with igus®
3 options mounting brackets
Several bending radii
Interior separation possible
Design specificationFurther information on "unsupported application"
Modular separators are available as interior shelving for the igus® Triflex® System. They can be used for both vertical and horizontal
sub-division. If the separators are assembled every other link and turned 90°, the tube can be sub-divided into four segments.
We recommend ordering the tube pre-assembled, as subsequent assembly of separators is only possible after dismantling the tube.
Please note that assembled separators have a different part number than unassembled separators.
Option 1 mounting bracket flange
Option 2 angle mounting bracket
Option 3 mounting bracket KMA
Data protection declaration