iglidur® J3 is our new material with increased wear resistance at low to medium loads and high speeds. The service life is up to 300% longer than with iglidur® J, the proven top endurance runner material.
iglidur® J3 is available as cylindrical bearings and plain bearings with flange.
Ask the product expert
Cylindrical bearing type S (metric)
Bearing with flange, type F (metric)
Cylindrical bearing type S (inch)
Bearing with flange, type F (inch)
(Dimension according to ISO 3547-1 and special dimensions) Recommended tolerance for the installation: Housing bore H7, Shaft h9. The tolerance for d1 is applicable for bearings that are press-fitted in a steel housing bore in the nominal dimension H7. For b1, tolerance field h13 is applicable . Chamfer in relation to the d1
Samples and catalog order
Notes for installation
Data protection declaration
Chamfer in relation to the d1