KTW-compliant. iglidur® UW160 is tribologically optimised for continuous use in liquid media.
Outstanding media resistance enables uses with more than just drinking water contact.
iglidur® UW160 is available as cylindrical bearings and plain bearings with flange.
Ask the product expert
cylindrical bearing type S (metric)
Bearings with flange, type F (metric)
(Dimension according to ISO 3547-1 and special dimensions) Recommended tolerance for the installation: Housing bore H7, Shaft h9. The tolerance for d1 is applicable for bearings that are press-fitted in a steel housing bore in the nominal dimension H7. For b1, tolerance field h13 is applicable . Chamfer in relation to the d1
Samples and catalog order
Notes for installation
Data protection declaration
(Dimension according to ISO 3547-1 and special dimensions) Recommended tolerance for the installation: Housing bore H7, Shaft h9. Tolerance field for d1 after the force-fitting in H7 housing bore. Tolerance field d13 applies for d3, tolerance field h13 for b1 and tolerance -0.14 for b2.
r = max. 0,5 mm Chamfer in relation to the d1
General information on iglidur® plain bearings