iglidur® J, sleeve bearing with flange, inch

iglidur® J | The versatile endurance runner
The iglidur® J plain bearings are characterised by the lowest coefficients of friction in dry operation and their very low stick-slip tendency. With a maximum recommended surface pressure of 35MPa, iglidur® J plain bearings are not suitable for extreme loads.

Typical applications

Vending machinery
Printing industry
Beverage industry
Aviation
Cleanroom

Find more applications here:
Industry solutions
 

When to use it? For high speeds When highest wear resistance at low to medium pressures is required Low wear against different shafts When a low coefficient of friction in dry operation is requested For vibration dampening When good chemical resistance is required For best performance with soft shaft materials Low moisture absorption

When not to use it? When high pressure loads occur iglidur® G, sleeve bearing with flange, imperial iglidur® W300, sleeve bearing with flange, imperial When temperatures of greater than +120°C occur in the short term iglidur® G, sleeve bearing with flange, imperial iglidur® Z, sleeve bearing with flange, imperial When a cost-effective bearing for occasional movements is sought iglidur® G, sleeve bearing with flange, imperial

Use our filter options to find the suitable product