My contact person

igus®

Caswell Road

Northampton, NN4 7PW

Fon 01604 677240

Fax 01604 677242

System E6.1: new generation of quiet running and cleanroom suitable echains®

After 10 successful years as a cleanroom and “whisper“ chain, the new generation is in the starting blocks. Besides the E6‘s proven benefits the new generation offers further advantages that significantly simplify the handling. Moreover, due to changes in the design the accessibility to the interior has been improved, the weight reduced and the assembly made easier.

Version without camber by turning the inner links

Super quiet due to small pitch and "brake" in the stop dog system
(E61.29.070.055.0 at 1m/s = 32dB(A) according to igus internal test 4479)

Extremely low vibration

Low-abrasion fastening system (no pin/hole connection)

Virtually no polygon effect, resulting in smooth operation

The smooth inner space is free of awkward edges for a long service-life of cables and hoses

Series E61.29: Crossbars snap-open on both sides and are removable along the inner and outer radius

Approx. 30% weight reduction compared to System E6

Low-priced

New generation interior separation, even more cable-friendly.

 

New snap-open mechanism, Series E61.29 optionally snaps open on left or right sides

 

KMA with fastening options in any direction

 
e-chain® selection aids

You can find the right e-chain® quickly by entering concrete parameters and with the aid of a comparison table.

Assembly instruction

Joining, separating and opening of the e-chain® and e-tubes.

Application examples

Applications in various industrial sectors and in the igus® test laboratory.

Crossbar openable along inner and outer radius, either both sides
E61.29  

E61.29

Inner height hi: 29 mm
Inner widths Bi: 30 - 140 mm
bending radii R: 55 - 150 mm
Pitch: 22 mm

Crossbars removable along the inner and outer radius, from both sides
EF61.29  

EF61.29

Inner height hi: 29 mm
Inner widths Bi: 30 – 140 mm
Bend radii R: 55 – 150 mm
Pitch: 22 mm

Crossbars removable along the inner and outer radius
e61.35  

E61.35

Inner height hi: 35 mm
Inner widths Bi: 30 – 140 mm
Bend radii R: 55 – 150 mm
Pitch: 25 mm

e61.40  

E61.40

Inner height hi: 40 mm
Inner widths Bi: 40 – 300 mm
Bend radii R: 63 – 200 mm
Pitch: 27,8 mm

E61.52  

E61.52

Inner height hi: 52 mm
Inner widths Bi: 40 – 300 mm
Bend radii R: 75 – 200 mm
Pitch: 30 mm

E61.62  

E61.62

Inner height hi: 62 mm
Inner widths Bi: 50 – 400 mm
Bend radii R: 115 mm
Pitch: 50 mm

e61.80  

E61.80

Inner height hi: 80 mm
Inner widths Bi: 50 – 600 mm
Bend radii R: 150 – 200 mm
Pitch: 65 mm

e-chain with 6.1 – swivelable crossbars

To protect the cables and hoses in the e-chain® even more effectively the design of the new E6.1 has been majorly advanced. Opening crossbars are very smooth and rounded, as is the transition from the chain link to the opening crossbar. All injection and marking locations were positioned outside of the cable cross-section.

Typical industrial sectors and applications

semi-conductor industry

Printer/Plotter industry

For applications with max. accelerations

When minimum noise and wear are important

IPA  

IPA classification - Report IG1303-640-1: ISO Class 1, according to standard DIN EN ISO 14644-1
for series E61.29.050.075.0.CR with v = 0.5 m/s, 1.0 m/s, 2.0 m/s
 
Extremely low noise
E61.29.070.055.0 at 1m/s = 32dB(A) according to igus internal test 4479

Y = weight [kg/m]
 
The new E6.1 generation has increased acceleration capability due to weight reduction - the e-chain® is also extremely quiet and highly dynamic.

 
Fraunhofer test

Y = Noise level dB (A)
 
Series E61.29 underwent noise testing in the igus® lab and demonstrates a noise level at -2 dB(A) below the already class-leading noise level of the igus® Series E6.29.

 
igus® for cleanrooms - suitability of E6.1 e-chains®

The already low abrasion of the e-chain® is yet again significantly reduced by employing a special material. In many applications where cumbersome special solutions are used, a simple standard e-chain® can be used instead. An extensive test program has been completed for both gliding and unsupported applications. For many applications, the e-chain® made of special material can be operated practically free of abrasion. IPA testing has confirmed that standard e-chains® by igus® meet cleanroom requirements, and have been rated as ”tested and rated as very good“. Cleanrooms call for a very high wear-resistance of moving parts - e-chains® (for example) must therefore be highly wear-resistant in order to meet the standard specifications for this sensitive environment.

 

IPA classification - ReportIG1303-640-1: ISO Class 1, according to DIN EN ISO 14644-1
for series E61.29.050.075.0.CR at v = 0,5 m/s, 1,0 m/s, 2,0 m/s