My contact person
igus® Ltd.
GB(EN)
Especially for long travel applications on machine tools, when the e-chain® has to be gliding, metallic chips are a problem. igus® guidelok is a cost-effective solution.
1. Chips cannot get stuck between the glide surface of the upper and lower run
2. Modular system with few parts (also possible without lateral trough)
3. Enormous increase of unsupported lengths of e-chains®
4. Intelligent upper run guide with pivoting roller brackets
Machine tools
Applications in the chip sector
Everywhere that a gliding application is not recommended
Horizontal “Guidelok” guides the e-chain® on special spring loaded roller supports (1), that are pushed back by the e-chain®´s radius, clearing its path
| For series | Inner width Bi [mm] | Bend radius R [mm] | Part No. horizontal trough with guidelok | ||
|---|---|---|---|---|---|
| E4.56 / R4.56 | 50 - 600 | 150,175,200,250,300 | 907.645.Bi.R.LLLL/FFFF |  Enquiries | |
| E4.80 / R4.80 | 50 - 600 | 150,175,200,250,300 | 907.645.Bi.R.LLLL/FFFF | Enquiries | |
| E4.112 / R4.112 | 50 - 500 | 200,250,300 | 907.645.Bi.R.LLLL/FFFF | Enquiries | |
| E4.56 / R4.56 | 200 - 600 | 350,400,450,500 | 907.837.Bi.R.LLLL/FFFF | Enquiries | |
| E4.80 / R4.80 | 200 - 600 | 350,400,450,500 | 907.837.Bi.R.LLLL/FFFF | Enquiries | |
| E4.112 / R4.112 | 200 - 600 | 350,400,450,500 | 907.837.Bi.R.LLLL/FFFF | Enquiries | |
| LLLL=Total length FFFF=Field length (standard 2,000mm) Possible for many further series (widths and radii), thanks to the modular system | |||||
