iglidur® T220 | For the tobacco industry, FDA-compliantiglidur® T220 is a special material for use in the tobacco processing industry. It fulfils the demands of the tobacco industry (engineering database). The material is free of forbidden ingredients, as required by well-known manufacturers as of 2004. They are free from carcinogenic additives such as, PTFE.
Typical application areas- Tobacco processing industry
Find more applications here:
Industry solutions When to use it?- When you need a bearing free from non-permitted materials in the tobacco industry
- When FDA compliance is required
| When not to use it?- When high surface pressures occur
iglidur® Z, sleeve bearing, mm - When looking for a cost-effective all-around bearing
iglidur® G, sleeve bearing, mm iglidur® M250, sleeve bearing, mm - When high wear resistance at low pressure is required
iglidur® J, sleeve bearing, mm - When only PTFE-free and silicone-free is required
iglidur® R, sleeve bearing, mm
|
Use our filter options to find the suitable productTolerances and measuring systemThe installation dimensions and tolerances of the iglidur® plain bearings depend on the material and wall thickness. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be installed with a smaller bearing clearance. The rule for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Testing methodsAssembly iglidur® plain bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing hole. The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearings. Axial or radial movements in the housing are thus reliably avoided.
iglidur® - assembling, gluing, machining
Certificates and standards