iglidur® V400 | For soft shafts, up to +200 °C
 

• Excellent wear resistance with soft shaft materials and for temperatures up to +200°C
• Good chemical resistance
• Flexible
• Lubrication-free and maintenance-free
• Standard range from stock

Highly wear-resistant bearings for soft shafts and temperatures up to +200°C with low moisture absorption and excellent resistance to chemicals.
 
Typical application areas
 
Vending machinery
Automotive
Aviation
Heavy machinery / Plant construction
 
Further applications can be found here:
Industry solutions
 

When to use it? When extreme wear resistance is required with soft shafts When the highest wear resistance at temperatures above +100°C is required When vibrations and edge loads are present When the bearing should be resistant to chemicals

When not to use it? For hardened shafts iglidur® W300, sleeve bearing with flange, mm For applications at normal temperatures iglidur® G, sleeve bearing with flange, mm iglidur® J, sleeve bearing with flange, mm iglidur® W300, sleeve bearing with flange, mm When a cost-effective universal bearing is required iglidur® G, sleeve bearing with flange, mm

Use our filter options to find the suitable product 
 
Tolerances and measuring system
The installation height and tolerances of iglidur® plain bearings are dependent on the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be designed with a minimal bearing clearance. The rule of thumb for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Testing methods
 
Assembly
iglidur® plain bearings are press-fit bearings. The inner diameter adjusts only after press-fitting into the correctly toleranced housing hole. The press-fit interference can be up to 2% of the inner diameter. This ensures that the bearing is securely press-fitted. Axial or radial movement in the housing are also prevented in this way.
iglidur® - assembling, gluing, machining