Shop modular system for robotics online

The Apiro® (Greek for "infinite") robot gearbox construction kit is now available as a starter kit. Build your own robot, including instructions.

The following assemblies can be built:
1. Apiro® room gantry
2. Apiro® area gantry
3. Apiro® mini articulated arm robot
4. Apiro® pusher
5. Apiro® 2-axis picker
6. Apiro® 3-axis picker
7. Apiro® 360° picker
8. Apiro® SCARA

Bevel gear units are used wherever motion and forces have to be transmitted at right angles. With a 1:1 transmission ratio, the transmitted torques can be transferred almost without loss.

• 1:1 transmission ratio
• Splash-proof
• Ini-kit available for all variants

Produktinformation

• Payload: 0,5 kg
• Reach: 400mm
• Reach in Z-axis: 360 mm
• Degrees of freedom: 3
• Speed: 6 picks/minute

Optionally available

• igus® Robot Control for SCARA robots

The cantilever axis from the Apiro® modular transmission system is now available with a double cantilever axis. Suitable for motorized or manual drive. The modules can be used in series or parallel for strokes from 60 - 1,050 mm.

Product information

• Payload: 3 kg
• Range: 600 mm
• Reach along the Z-axis: 3000 mm
• Degrees of freedom: 4
• Speed: 20 picks/minute
• IP Protection Class IP45, splash-proof

Optionally available

• igus® Robot Control for SCARA robots

Product description

• Education kit for colleges, universities and educational institutions
• Project panels with a connection to reality and scenarios from the igus factory
• With ready-made educational documents for students and teachers; over 100 hours of learning material
• Compatible with all gantry robots
• System can be expanded with additional components

Product information

• Without connection cables
• Set consists of 3x drylin D7

 

• Can control stepper motors with up to 2.7 A continuous current at supply voltage of up to 48 V
• Ready to use immediately
• Easy control
• Exact positioning

Product description

• Education kit for colleges, universities and educational institutions
• Project panels with a connection to reality and scenarios from the igus factory
• With ready-made educational documents for students and teachers; over 100 hours of learning material
• Compatible with all Delta robots
• System can be expanded with additional components

Product Information

• Compatible with all igus ReBeL models
• 4-finger gripper in hand design
• Motion plastics for low weight

Product information

• Payload up to 8.0 kg
• Working area 1000 x 1000 mm
• Degrees of freedom: 2
• Speed: up to 0.5 m/s
• Repeatability ± 0.8 mm

Optionally available

• Other dimensions available upon request
• Control systems
• Cable set for 2-axis kinematics in 3, 5 or 10 m

Product information

• With and without collision detection
• With and without mapping
• Control via igus Robot Control or ROS2
• Mecanum wheels for special maneuverability
• Approx. 4 hrs battery life
• ReBeL is easy to dismantle (4 screws)

Product information

• Payload up to 10.0 kg
• Working area 2000 x 1000 mm
• Degrees of freedom: 2
• Speed: up to 1.0 m/s
• Repeat accuracy ± 0.5 mm

Optionally available

• Other dimensions available upon request
• Control systems

Product information

• Payload up to 5.0 kg
• Working area expandable up to 3000 x 1000 mm
• Degrees of freedom: 2
• Speed: up to 1.0 m/s
• Repeat accuracy ± 0.5 mm

Optionally available

• Other dimensions available upon request
• Control systems