1. KMA, flange or angle mounting brackets available2. Combinations of different bend radius and axes of movement3. Fully enclosed4. Excellent protection from dirt and chips5. Cost-effective design for complex movements6. Easy to lengthen and shorten at any point7. High tensile strength
** The calculated length corresponds to the chain length without mounting brackets.
Travel: Spitch: 25 mmlinks/m: 40(1000 mm)Dimension E: 20 mmBa: 50 mmchain length: S/2 + K
Unsupported length versus fill weightX axis: Unsupported length in m FLB/FLGY axis: Fill weight in kg/mLower scale: Travel S in mFLB = Unsupported with permissible sagFLG = Unsupported with straight upper run
Note: Unsupported lengths only for one axis type!
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
3 mounting bracket variants
Several bend radii
Interior separation possible
Design specificationFurther information on "unsupported application"
Option 1: Separators
Modular separators are available as interior separation for the igus® triflex® system. They can be used for both vertical and horizontal subdivision. If the separators are assembled every other link and turned 90°, the e-tube can be subdivided into four segments. We recommend ordering the e-tube preassembled, as subsequent assembly of separators is only possible after dismantling the e-tube.
Option 1 flange mounting bracket
Option 2 angle mounting bracket
Option 3, KMA mounting bracket
Data protection declaration