1.Large pins; long service life2.Cable-friendly interior3.Dirt-repellent4,240 snap-open on the inside / 250 snap-open on the outside5.integral strain relief6.Chamfered opening; easy assembly7.Reinforced stop-dogs8.Snap-open along both sides
Available inner widths Bi: 25 to 125 mmAvailable bend radii R: 55 to 250 mmPitch: 46 mm/link = 22 links/m
For new designs, we recommend the improved e-chain® series 2500 from the igus® E2/000 range.Secure support of the opening crossbars, improved opening mechanism, larger unsupported lengths, identical dimensions
Series 250 is available from stock in limited numbers.
For questions, please refer to your igus® contact person. Thank you for your understanding
regarding the E2/000 Series 2500
* The required clearance height is HF = H + 25 mm (with 1.5 kg/m fill weight), this should be taken into account for all application types.Please contact us if you have particularly confined space requirements.
** The calculated length corresponds to the chain length without mounting brackets.
A=Moving end, B=Fixed endPitch: 46 mmChain links per m: 22Travel: SChain length = S/2 + K
Unsupported length versus fill weightX axis: Unsupported length in m FLB/FLGY axis: Fill weight in kg/mLower scale: Travel S in mFLB = Unsupported with permissible sagFLG = Unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
7 widths and 9 bend radii
3 interior separation options
5 mounting bracket variants
A range of strain relief options
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Option 1. Separators
Option 2: Full-width shelves
Option 3: Shelves
At the same time, separators are the only option to separate the interior of the non-openable chain of the type 200. Separators with a wider base (not Series 200) limit the distance between 2 separators to 26 mm. Spacers assume the same function. Both are used primarily for side-mounted chains.
This option is only for the snap-open chains of type 240 / 250. This option is useful when using many thin cables with similar diameters. This variant always takes up the entire inner width of the chain.
This is an option for type 2400/2500 openable chains. This option is useful for applications with many cables of different diameters. Both full width internal separation and partial width separation can be implemented.
Plastic - pivoting
Plastic - locking
KMA - pivoting
KMA - locking
"Super-aluminium", "Basic" guide trough
"Super-Alu" guide trough, "Heavy Duty"
Steel guide troughs
1. Trough side part, aluminium, 2 m
2. Glide bar, plastic, 2 m
3. Plastic glide strips*, side, 2 m
4. Clamping shoe, aluminium
5. C-profile, galvanised steel
6. Screw M6 x 16
7. Sliding nut M6
8. "Basic" connector, plastic
*without glide strips on request
"Super-aluminium" trough - the igus® standard for guide troughs
The "Super" aluminium trough is a modular system of guide troughs for long travels (where e-chains® are gliding on top of themselves). The basic "Super" aluminium trough has a simple and cost-efficient designs and can be expanded for sophisticated plant engineering.
Its universal design makes it the recommended igus® standard for guide troughs.
1. Interface connector
2. Plastic glide bar
3. Clamping shoe
4. Glide strips
9. Heavy-duty bracket option
10. Silencer profile, rubber
11. Screw M6 x 20
1. Aluminium profiles
3. Heavy-duty bracket option
6. Silencer profiles
1. Guide trough (blue)2. Glide bar (black)3. Installation set (red)4. Individual bracket without C-profile5. Profile rail length
+ Easy assembly using installation sets+ 2-part design - configurable from chain width+ Very stable+ cost-effective+ large selection
Guide trough without glide bars, Part No. 92.30, guide trough with glide bars Part No. 92.31
Installation sets, Part No. 92.50. XX
Data protection declaration