triflex® R TRLF.100

Here you can configure your e-chain system® individually. All entries and changes are taking over to the part list which is situated at the end of the page.

System triflex® R series TRLF.100

1. TRLF - lightweight and low-cost with snap-lock mechanism
2. For multi-axis movements - twist of approx. ± 10 per chain link in the longitudinal axis
3. High tensile force absorption due to ball and socket joint
4. Easy opening for large, rigid| hoses and/or many cables
5. Easy assembly and disassembly
6. Extremely lightweight due to one-piece design
7. 3-chamber design for interior separation
8. Small bend radius, small pitch
9. Lightweight and cost-effective mounting bracket with strain relief or as intermediate bracket

When to use TRLF.100 series:

When easy opening by hand or with a screwdriver is required
For thick, rigid hoses and/or many cables
Multi-axis e-chain® for undemanding environmental conditions
If the system needs to be easy to lengthen and shorten
When easy filling and replacing with pre-assembled cables or media hoses is important

When not to use TRLF.100 series:

For circular movements with high load
twisterchain® system
If a completely closed variant is required
triflex® R TRC system
If a stronger, easy-to-fill option is required
triflex® R TRE system
When a cost-effective, less sophisticated multi-axis solution is required
triflex® R TRL system

Installation dimensions


Part No. :
Inner width Bi [mm]:
Bi1 [mm]:
Bending radius R [mm]:
Chain length [mm]:
Number of chain links :
External width Ba [mm]:
d1 [mm]:
Hi [mm]:
Ha [mm]:
Weight per link [g]:
Weight [kg/m]:

Please use Configurator for partitioning of interior and for filling with cables.

Call configurator

Price index:

Opening mechanism :

Personal contact

Application examples 3D-CAD Samples and catalog order E-Chain® Expert call Service life calculation PDF file Ask the product expert

Designing with igus®

triflex® R heat protection sleeve for protecting from metal spatter up to 600°C

Assembly instructions

Technical specifications

Strain reliefs

Mounting brackets

Light mounting brackets

Swivel bearings

Mounting brackets with bend radius support

unassembled	assembled

Standard for TRL version, but also compatible with all triflex® R variants (TRC/TRE)
Mounting bracket with strain relief or as intermediate link
Cost-effective and lightweight
For simplified 3D motion and loads
Consisting of two halves and easy to install


Part No. :
A [mm]:
B [mm]:
D [mm]:
E [mm]:

unassembled	assembled

To ensure a better, gentler movement of the cables being guided, compensation must be provided for extreme torsion and reverse bending, especially for sensitive cables with a large bend radius (e.g fibre optic cables)
2 versions (with or without strain relief)
Pivoted mounting with maintenance-free igubal® spherical bearings
Minimising the critical reverse bend
Movements are gentler


Part No. :
A [mm]:
B [mm]:
C [mm]:
D [mm]:
E [mm]:
F [mm]:
G [mm]:

unassembled	assembled

Quick and easy installation
Extremely short time to exchange a pre-filled triflex® R
Mounting bracket available with strain relief tooth
Mounting bracket also available as intermediate link and with swivel bearing
Quick mounting with captive snap lock
Mounting holes for common robot types
Final or intermediate mounting possible


Part No. :
A [mm]:
B [mm]:
C [mm]:
D [mm]:
E [mm]:
F [mm]:

Part List

Personal contact

GToB Imprint General notes Data protection declaration

Material of chain links	igumid G
Min. permissible temperature [°C]	-40
Max. permissible temperature [°C]	120
Flammability class of chain link	VDE 0304 IIC UL94 V2