iglidur® P210 | Specialist for pivoting, rolling applications and more - Good friction and wear coefficients on almost any shaftWith iglidur® P210 plain bearings, the user has versatile all-round bearings at his disposal, which show above-average durability especially in pivoting applications with medium loads of up to 20MPa. This versatile material has already proven its worth in many customer-specific solutions and as a bar stock material. Clip-on or preloaded designs as well as vehicle interior applications are possible.
Typical applicationsAgricultureMachine toolsFurniture/Industrial designTextile industryFind more applications here:
Industry solutions When to use it?- When a universal plain bearing for use in a moist environment is required
- When a wear-resistant plain bearing for pivoting applications at medium loads is required
- When edge loads and shocks occur
- When the surface pressure of iglidur® J is insufficient
| When not to use it?- When a universal bearing with the greatest possible range of dimensions is required
iglidur® G, sleeve bearing with flange, imperial - When a bearing is required for very heavy duty pivoting applications
iglidur® Q, sleeve bearing with flange, imperial iglidur® Q2, sleeve bearing with flange, imperial - When temperatures greater than +100°C occur
iglidur® G, sleeve bearing with flange, imperial iglidur® J350, sleeve bearing with flange, imperial
|
Use our filter options to find the suitable productTolerances and measuring systemThe installation dimensions and tolerances of the iglidur® plain bearings depend on the material and wall thickness. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be installed with a smaller bearing clearance. The rule for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Testing methodsAssembly iglidur® plain bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing hole. The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearings. Axial or radial movements in the housing are thus reliably avoided.
iglidur® - assembling, gluing, machining
Certificates and standards