|Ready for immediate use|
The dryve motor control system can either be connected to your network
or you can connect it directly
to the control unit (PC or PLC) by means of a network cable. You can then start
the control system directly in the browser without software installation. Settings can therefore be made in one minute.
|Simple control system|
You can use the simple intuitive browser interface to parameterise travels, position,
speed and operating time of your linear axis even as an amateur. Movements that are continuously repeated
are known as "looping" and can be set in just a few seconds. A teach function enables position settings to be made with just one mouse click.
Due to standardised communication protocols such as CANopen
or Modbus TCP as gateway, it is very easy to connect the system to
industrial controllers, such as the Siemens S7 or Beckhoff.
The ten digital inputs and five outputs enable extremely easy communication with industrial controllers
but also with low-price open-source modules, such as Arduino or Raspberry Pi.
dryve supports DC, EC and stepper motors, both in open-loop and closed-loop technology.
The supply voltage of up to 48V ensures high motor speeds. The nominal current
of 7A and the peak current of 21A results in powerful and dynamic movements.