Product information
- Payload
up to 5.0kg
- Workspace
expandable up to 3,000 x 1,000mm
- Degrees of freedom:
2
- Speed:
up to 1.0m/s
- Repeatability ± 0.5mm
Optionally available
Product information
Optionally available
Line robot
For a wide variety of tasks, igus offers linear robots as surface, line and room linear robots. igus linear robots contain pre-configured drylin linear modules and linear axis with igus BLDC motors as well as all the components required for self-assembly.
Application examples
Typical applications of our drylin® line robots are pick & place, conveyor belt picking and stacking tasks. They usually provide the platform on which our customers build their application. For example, a gripper can be mounted very easily to enable sorting tasks. Our linear robots are used in various industries such as the electronics industry, medical technology, industrial manufacturing, etc.
Y-axis
consisting of: two drylin® ZLW-10120 toothed belt axes, standard version, toothed belt tension 200N, feed 70mm/rev, aluminium profile, surface: hard-anodised, PU toothed belt with steel tension cord, white, guide carriage in length 150mm, shaft end supports made of aluminium, driven by an igus EC / BLDC motor in installation size NEMA24 with encoder and gearbox (i=5:1)
Z-axis
consisting of: drylin® GRR-1280 cantilever axis, AWMR hollow shafts, feed: 72.26mm/rev, aluminium shafts, guide carriage in length 100mm, incl. adjustable housing bearings, shaft end supports made of aluminium, driven by an igus EC / BLDC motor in installation size NEMA24 and encoder and gearbox (i=5:1).
Robot control system
The igus Robot Control software enables simple and intuitive robot control and programming and thus an easy introduction to automation. The modular design makes it possible to control different igus kinematics, for example delta robots. The linear robot can be controlled directly with all its advantages by our igus® Robot Control.
The free and licence-free igus Robot Control software is integrated into the control system and therefore uses a uniform operating concept and consistent communication services for many components of a system. This means less project planning and faster commissioning.
The igus Robot Control is not part of the product and can be purchased optionally from us. A master control system is not necessary.
You are also welcome to use your own (robot) control system.
Alternatively, it is also possible to operate each axis individually with a control system. For example with our igus® D1 dryve motor control system. With this control architecture, you need one motor control system and an additional master control system per linear axis and motor, which controls the coordination of the movement. You then have to program the inverse kinematics for the delta robot yourself in your development environment.
The motor control systems are not part of the product and can be purchased optionally from us. A master control system is currently not offered by igus.
Optional accessories
Further sizes available upon request or e-chain set for DLE-RG-0001 available separately.
Further information
In addition, further stroke of up to 3m are available as standard and up to 6m after technical inspection.
If you are unsure whether you can use the product as desired, please contact us or use our linear robot configurator (Beta).