iglidur® V400 | For soft shafts, up to +200°CHighly wear-resistant bearings for soft shafts and temperatures up to +200°C with low moisture absorption and very good chemical resistance.
Typical applicationsVending machineryAutomotiveAviationHeavy machinery / Plant constructionFind more applications here:
Industry solutions When to use it?- When extreme wear resistance is required with soft shafts
- When the highest wear resistance at temperatures above +100°C is required
- When vibrations and edge loads are present
- When the bearing should be resistant to chemicals
| When not to use it?- For hardened shafts
iglidur® W300, sleeve bearing, mm - When room temperatures prevail
iglidur® G, sleeve bearing, mm iglidur® J, sleeve bearing, mm iglidur® W300, sleeve bearing, mm - When a cost-effective universal bearing is sought
iglidur® G, sleeve bearing, mm
|
Use our filter options to find the suitable product Tolerances and measuring systemThe installation dimensions and tolerances of the iglidur® plain bearings depend on the material and wall thickness. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be installed with a smaller bearing clearance. The rule for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Testing methodsAssembly iglidur® plain bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing. The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearings. Axial or radial movements in the housing are reliably avoided.
iglidur® - assembling, gluing, machining
Certificates and standards