iglidur® L500 | For extreme rotational speeds iglidur® L500 is a plain bearing material for high speeds, fast sliding movements with low loads. Due to the low thermal expansion and low moisture absorption, bearings can be manufactured with very little clearance. Applications which feature these advantages are fans, small motors, fast-running sensors or magnet technology.
Typical applications Automotive[Link id="26"]
Machine toolsFind more applications here:
Industry solutions When to use it?- For rotating applications at high
speed - When the highest service life is required
- For high pv values with low loads
- At operating temperatures up to +250°C
(permanent, short-term up to max. +350°C)
| When not to use it?- When a universal bearing for high temperatures is sought
iglidur® X, sleeve bearing with flange, mm - When medium to high pressure loads occur
iglidur® G, sleeve bearing with flange, mm
iglidur® Q, sleeve bearing with flange, mm - For oscillating applications
iglidur® W300, sleeve bearing with flange, mm
iglidur® J350, sleeve bearing with flange, mm
|
Use our filter options to find the suitable productTolerances and measuring systemThe installation dimensions and tolerances of the iglidur® plain bearings depend on the material and wall thickness. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be installed with a smaller bearing clearance. The rule for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Testing methodsAssembly iglidur® plain bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing hole. The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearings. Axial or radial movements in the housing are thus reliably avoided.
iglidur® - assembling, gluing, machining
Certificates and standards
