drylin® E stepper motor, stranded wires with JST connector, NEMA8

MOT-AN-S-060-001-020-L-A-AAAA product image

MOT-AN-S-060-001-020-L-A-AAAA technical drawing

1 from 4

drylin® E stepper motor, stranded wires with JST connector, NEMA8

Installation size: NEMA8/flange dimension 20mm
Protection class motors housing: IP40
Holding torque: 0.026Nm
Nominal current: 0.6A
Motor connection: stranded wires

Part No.

MOT-AN-S-060-001-020-L-A-AAAA

The little one with a lot of power

The advantage of this motor is its very small design and the constant torque at higher speeds. High loads can be moved with a suitable lead screw pitch. This motor is used in medical technology, laboratory automation and industrial automation. The motor connection has a JST connector. This protrudes 300mm from the rear part of the motor housing. The advantage of this connector is that it is more cost-effective than the metric connector. The encoder also has a JST connector. But this has no cable. The cable from the motor control system is connected directly to the encoder.