J-spherical insert bearing, injection moulded, low moisture absorption

igubal JEM SP – the versatile endurance runner 

The JEM-SP spherical insert bearing, produced using the injection moulding process, can be used in pillow block bearings and flange mounted bearings. It is made of the high-performance plastic iglidur J, which is characterised by particularly low wear, a long service life and low moisture absorption.

Thanks to the embedded solid lubricant, no additional lubrication is required, which makes operation in contaminated environments particularly advantageous. Our spherical insert bearings are easy to install and offer a cost-effective and lightweight alternative to a conventional metal ball bearing.

Housing compatibility

In our shop, you will also find flange mounted bearings and pillow block bearings with plastic housings, which have a positive effect on the total weight of your system.

As a PTFE-free alternative, we also offer our injection mould spherical insert bearings made from iglidur J3: J3EM-SP

igubal J spherical insert bearing

• Temperature range [°C]: -50 to +90, short-term +120
• Shaft diameter: 17mm - 24mm
• Housing sizes: P/F/FL 203 - 210, PP/PFL 204 - 208 
• Advantages: Maintenance-free, lubrication-free, long-lasting, resistant to dust and dirt, vibration-dampening, good chemical resistance, low moisture absorption, good wear resistance, resistant to radiation intensity up to 3 · 10²Gy.
• Dimensional series: Based on DIN 626-1 (Rolling bearing - Radial deep groove ball bearing with spherical outer ring surface and extended inner ring - Part 1: Insert bearing)
• Application environment: High speeds, high wear resistance at low to medium pressure loads, low wear with a variety of different shafts, low coefficient of friction in dry operation, excellent performance with soft shafts