1. Torsional movements possible 2. Large pins - long service life 3. Cable-friendly interior 4. Mounting bracket with integrated strain relief possible 5. Version E, to be filled along the outer radius 6. Version Z, to be filled along inner radius 7. Dirt-repellent outer contours 8. Very easy to fill 9. Interior separation possible 10. Available with 1, 2 or 3-chamber design (permanently injection-moulded multiple chamber design for separate cable laying) Series E300.2 ) Series E300.3 11. "Push button principle" holds links together
Available Inner widths:1775 mmAvailable bend radii R: 75 to 300 mmPitch: 67 mm / link = 15 links/m
* The required clearance height is HF = H + 40 mm (at 2.5 kg/m fill weight), which should be observed in all types of applications. Please contact us if you have particularly confined space requirements.
** The calculated length corresponds to the chain length without mounting brackets.
Crossbars overlapping on the opening mechanism A=moving end, B=fixed endPitch: 67mmLinks / m: 15Travel: SChain length = S/2 + K
The unsupported length depends on fill weightX axis: unsupported length in m FLB/FLGY axis: fill weight in kg/mLower scale: travel S in mFLB = unsupported with permissible sagFLG = unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
2 mounting bracket variants
1 width and 7 bend radii
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Plastic - pivoting
Plastic - locking
Data protection declaration