1. No pin and bore connection, little abrasion 2. Small pitch for quiet, smooth running 3. Very large sliding surfaces 4. Modular design can be lengthened or shortened as required 5. Large inner height 6. Interior stop-dog 7. KMA mounting bracket with fully enclosed option (strain relief possible through separate tiewrap plates) 8. Strain relief crossbar E6.29.02.Z for use on the first or last chain link
* The required clearance height is HF = H + 40 mm (at 2 kg/m fill weight), which should be observed in all types of applications. Please contact us if you have particularly confined space requirements.
** The calculated length corresponds to the chain length without mounting brackets.
A=moving end, B=fixed endPitch: 22 mmChain links per m: 46 links/1012 mmTravel: SChain length = S/2 + K
The unsupported length depends on fill weightX axis: unsupported length in m FLB/FLGY axis: fill weight in kg/mLower scale: travel S in mFLB = unsupported with permissible sagFLG = unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
10 widths and 4 bend radii
Modular internal separations
KMA - mounting brackets
Super quiet design
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Option 1: Separators
Option 2: Optional
Option 3: Optional
Option 1: standard 29.1 standard – for all uses Separator, wide base for maximum holding strength and stability in e-chains® 29.2 - Faster cable installation Secure seating on one side, with a wide base, opposite side narrow for easy cable installation (easily clamped). 29.5 - Locks in securely in 2.0 mm increments Notch separator for notch crossbar with scaling. Can be positioned precisely. Recommended for side-mounted applications. 2300.X - Horizontal interior separation Locks securely into separators at both ends, giving a fixed width. Can be used as a full-width shelf for integrated interior separation or as a shelf for modular shelving at three levels.
Option 2: Optional slotted separator E6.29.01 For vertical separation. The slot allows basic vertical/horizontal shelving arrangements. Slotted notch separator E6.29.01.R Can be locked into placed/fixed in position in 2mm increments due to special notches in the openable crossbars of the e-chain®. The separator cannot slide sideways during operation. Full-width shelf 110.X Recommended if many small cables with similar or same diameters are used. Full-width shelves can be arranged in steps of 5mm on 5 levels.
Option 3: Optional Middle plate E6.29.12/E6.29.12.Z For separation with shelves 2200.X in vertical increments of 5 mm on 5 levels. E6.29.12.Z - strain relief separator Side plate E6.29.03 like middle plate. Allows modular shelving right up to the side links. No clearance required! Shelves 2200.X For horizontal separation. Shelves of various widths can be arranged in steps of 5mm on 5 levels.
KMA - pivoting
Tie wrap plate or strain relief with C-profile can be fitted to the last chain link.
Support tray - Type 01
Data protection declaration