1. No pin and bore connection,
little abrasion2. Small pitch for quiet, smooth running3. Very large gliding surfaces4. Internal stop-dog5. KMA mounting brackets with option to fasten from any side (strain relief
is possible through separate tiewrap clamps)6. Can be lengthened and shortened as required, thanks to modular design 7. Strain relief separator - E6.35.02.Z separator with integrated strain relief tiewrap plates for use on the first or last chain link
* The required clearance height is HF = H + 40 mm (with 2 kg/m fill weight), this should be taken into account for all application types.Please contact us if you have particularly small space requirements.
** The calculated length corresponds to the chain length without mounting brackets.
A=Moving end, B=Fixed endPitch: 25 mmChain links per m: 40 links/1000 mmTravel: SChain length = S/2 + K
Unsupported length versus fill weightX axis: Unsupported length in m FLB/FLGY axis: Fill weight in kg/mLower scale: Travel S in mFLB = Unsupported with permissible sagFLG = Unsupported with straight upper run
Reference example A:
Fill weight = 3.0 [kg/m]
Unsupported length FLB = 1.4 m
Travel = 2.8 m
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
10 widths and 5 bend radii
Modular internal separations
KMA - mounting brackets
Super quiet design
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Option 1: Standard
Option 2: Optional
Option 3: Optional
E6.35.1 Standard - for all uses
Separator, wide base for maximum holding strength
E6.35.2 - Quicker installation of cables
Firm seating on one side, with wide base, opposite side
narrow for easy installation of cables.
E6.35.5 - Locks in securely in 2.0 mm increments
Locking separator for locking crossbar with scaling. Can be positioned precisely. Recommended for side-mounted applications.
2300.X - Horizontal division
Locks securely into separators at both ends, giving a fixed width. Can be used as full-width shelf for
integrated subdivision or as a partial shelf for
separation on 3 levels.
Option 2: Optional
For vertical separation. Separators can be arranged at any position in the chain cross-section to divide the interior of the e-chain®. For combinations
with full-width shelves.
Full-width shelf 110.X
Recommended if many thin cables with similar
diameters are used. Full-width shelves can be arranged in steps of 5 mm on 5 levels.
Option 3: Optional
For separation with intermediate shelves
2200.X at vertical intervals of 5 mm on 5 levels.
6.35.02Z - Strain relief separator
Side plate E6.35.03
like separator. Enables interior separation
up to the side links. No minimum side clearance required!
Intermediate shelf 2200.X
For horizontal separation. Shelves
of various widths can be arranged in steps of 5 mm on 5 levels.
KMA - pivoting
Tie wrap plate can be engaged in the last chain link.
"Super-aluminium", "Basic" guide trough
"Super-Alu" guide trough, "Heavy Duty"
Steel guide troughs
1. Trough side part, aluminium, 2m
2. Glide bar, plastic, 2m
3. Plastic glide strips*, side, 2m
4. Clamping shoe, aluminium
5. C-profile, galvanised steel
6. Screw M6 x 16
7. Sliding nut M6
8. "Basic" connector, plastic
10. Optional: rubber silencer profile
*without glide strips upon request
"Super-aluminium" trough - the igus® standard for guide troughs
The "Super-aluminium" trough is a modular system of guide troughs for long travels (where e-chains® glide on each other). The basic "Super-aluminium" trough is available in simple, cost-effective "basic designs" and can be expanded for sophisticated plant construction. This universal usability makes it the recommended igus® standard for guide troughs.
1. Interface connector
2. Plastic glide bar
3. Clamping shoe
4. Glide strips
New! Rapid assistance for mounting the e-chain® fixed end
The new fixed-end module makes it quick and easy to install the KMA mounting bracket on the "Super-aluminium" trough – no drilling required.
9. Heavy-duty bracket option
10. Silencer profile, rubber
11. Screw M6 x 20
1. Aluminium profiles
3. Heavy-duty bracket option
6. Silencer profiles
1. Guide trough (blue)2. Glide bar (black)3. Installation set (red)4. Individual attachment without C-profile5. Profile rail length
+ Easy assembly using installation sets+ two-part model – adjustable from chain width+ Very strong+ Cost-effective+ Large selection
Guide trough without glide bars, Part No. 99.30; guide trough with glide bars, Part No. 99.31
Installation sets as joint connectors, Part No. 95.50. XX
Support tray - Type 01
Data protection declaration