1. Very smooth running using the tried-and-tested igus® connector design, 38 db(A) max. 2. Ideal for high accelerations and speeds 3. Small pitch 4. Three-part design 5. Modular design - crossbars, interior separation and connector on a strip 6. Simple and fast installation and filling using curved connectors and cross bars on a belt 7. Large-surface outer stops and high load capacity using engaging stops 8. Can be shortened as necessary 9. Suitable for ribbon cables 10. Accessories available such as interior separation, strain relief and mounting bracket
* The required clearance height is HF = H + 50 mm (at 0.2 kg/m fill weight), which should be observed in all types of applications. Please contact us if you have particularly confined space requirements.
** The calculated length corresponds to the chain length without mounting brackets.
Pitch: 16.7 mmChain link per m: 60 (1002 mm)Chain length = S/2 + KA = moving endB = fixed end
The unsupported length depends on fill weightX axis: unsupported length in m FLB/FLGY axis: fill weight in kg/mLower scale: travel S in mFLB = unsupported with permissible sagFLG = unsupported with straight upper run Reference example A: Fill weight = 0.30 [kg/m] Unsupported length FLB = 0.81 m Travel = 1.62 m
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
E3.15 e-chain® with openable crossbar on a strip
Separator on a strip
KMA mounting bracket
Tiewrap plate set
Data protection declaration