1. Swarf-resistant design without undercuts or edges 2. Rounded contour 3. Large filling space with max. 62 mm inner height 4. Covered pin and bore connection and stop-dogs 5. "Reverse Bend Radius" version with bend radius on both sides available as standard 6. Lid can be removed on the outer radius 7. Mounting bracket with strain relief option 8. Interior separation available 9. Guide trough available
* The required clearance height is HF = H + 50 mm (at 0.5 kg/m fill weight), which should be observed in all types of applications. Please contact us if you have particularly confined space requirements.
** The calculated length corresponds to the chain length without mounting brackets.
A=moving end, B=fixed endPitch: 48 mm per linkChain links per m: 21Travel: SChain length = S/2 + K
The unsupported length depends on fill weightX axis: unsupported length in m FLB/FLGY axis: fill weight in kg/mLower scale: travel S in mFLB = unsupported with permissible sagFLG = unsupported with straight upper run Reference example A: fill weight = 5.0 [kg/m] unsupported length FLB = 1.5 m travel = 3.0 m
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Simple opening of the lid on the outer radius with contoured eccentric closure
1 width and 9 bend radii
RX e-tubes to withstand 850°C hot chips, as a special option.
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Option 1 - Slotted separators Vertical separation of the large filling space with cable-friendly plastic separators Due to their slots, basic vertical/horizontal shelving arrangements are possible. As standard igus® separators are fitted every 2th e-chain® link. Part no. RX48.1 (centre position) and part no. RX48.2 (outer positions)
Option 2 - Full-width shelves Vertical separation of the large filling space with cable-friendly plastic separators. Due to their slots, basic vertical/horizontal shelving arrangements are possible. As standard igus® separators are fitted every 2th e-chain® link. Part no. RX48.1 (centre position) and part no. RX48.2 (outer positions) Horizontal interior separation Locks securely into the separator at both ends, allowing a fixed width. Separators can be moved freely over the shelf in horizontal direction and can be fitted at one height.
Data protection declaration