Cylindrical bushings with flange

Plain bearings - maintenance- and lubrication-free
Sleeve bearings made from high performance plastics provide mechanical stability with the lowest coefficients of friction without additional lubrication. Whether in dirt and dust, in the cleanroom laboratory or under water.
 

Products

Filter

Core Requirements
Requirements
Material

Number of products: 52

iglidur® H1, sleeve bearing with flange, mm
  • Endurance runner with high media resistance
  • High wear resistance in extreme ambient conditions
  • Very low coefficient of friction
  • High resistance to temperature and chemicals

Upon request

13 of 47 articles ready for shipping in 24 - 48 h
To the product page
iglidur® B, sleeve bearing with flange, mm
  • High elasticity and low noise
  • Elimination of noise
  • Very high elasticity
  • Sealing function possible
iglidur® Z, sleeve bearing with flange, mm
  • Extremely long service life under extreme conditions, resistant to wear and impact even at high loads and temperatures
  • Excellent wear resistance especially with high loads
  • High thermal resistance
  • For extreme loads

from 4.01 USD / Pc.

28 of 66 articles ready for shipping in 24 - 48 h
To the product page
iglidur® J200, sleeve bearing with flange, mm
  • Specially for aluminium shafts
  • Very long service life with hard anodised aluminium
  • Low coefficients of friction
  • Low wear
iglidur® UW160, sleeve bearing with flange, mm
  • KTW-compliant, suitable for contact with drinking water
  • Extremely wear-resistant in liquid at long-term operation
  • Suitable for contact with drinking water (KTW-compliant)
  • Good liquid media resistance

Upon request

6 of 6 articles ready for shipping in 10 working days
To the product page
iglidur® A200, sleeve bearing with flange, mm
  • FDA-compliant, for low speeds
  • iglidur® A200 material complies with food and drug administration (FDA) regulations
  • For direct contact with food
  • For low speeds

from 1.06 USD / Pc.

76 of 77 articles ready for shipping in 24 - 48 h
To the product page
iglidur® G V0, sleeve bearing with flange, mm
  • V0 rating according to UL94, universal
  • UL94 V0 rating
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Abrasion resistant
  • Universal installation

Upon request

11 of 11 articles ready for shipping in 10 working days
To the product page
iglidur® V400, sleeve bearing with flange, mm
  • For soft shafts, up to +200 °C
  • Excellent wear resistance with soft shaft materials and for temperatures up to +200 °C
  • Good resistance to chemicals
  • High elasticity

Upon request

7 of 7 articles ready for shipping in 10 working days
To the product page
iglidur® T220, sleeve bearing with flange, mm
  • For the tobacco industry, FDA-compliant
  • Free from banned ingredients as requested by main manufacturers of tobacco products
  • The iglidur® T220 material complies with food and drug administration (FDA) regulations
  • Lubrication and maintenance-free
iglidur® C500, sleeve bearing with flange, mm
  • High resistance to media and temperature, up to 250 °C, wear-resistant
  • High resistance to media and temperature
  • Resistant to water vapour
  • Good coefficients of friction and wear

Upon request

6 of 6 articles ready for shipping in 10 working days
To the product page
iglidur® P, sleeve bearing with flange, mm
  • The cost-effective outdoor allrounder - No moisture expansion even with high ambient humidity
  • Low water absorption
  • Low wear rates
  • High load capacity

Upon request

37 of 70 articles ready for shipping in 24 - 48 h
To the product page
iglidur® G1, sleeve bearing with flange, mm
  • Two times longer service life at high loads
  • Up to 4 times lower wear at low loads
  • Long-term service temperature up to +180°C
  • Pressfit up to +120°C (iglidur® G: up to +80°C)
  • Moisture absorption reduced by 50%

Upon request

25 of 37 articles ready for shipping in 24 - 48 h
To the product page
iglidur® Q, sleeve bearing with flange, mm
  • For high loads - wear-resistant on many shafts
  • Excellent wear resistance, especially for extreme loads
  • Recommended for extreme pv values
  • Good coefficients of friction

from 1.62 USD / Pc.

22 of 30 articles ready for shipping in 24 - 48 h
To the product page
iglidur® A500, sleeve bearing with flange, mm
  • The endurance runner at higher temperatures in the food sector
  • Compliant with EC directive 10/2011 EC
  • FDA-compliant
  • Temperature resistant from -100 °C to +250 °C

Upon request

10 of 45 articles ready for shipping in 24 - 48 h
To the product page
iglidur® A180, sleeve bearing with flange, mm
  • The FDA-compliant all-rounder
  • The iglidur® A180 material complies with food and drug administration (FDA) regulations for repeated contact with food
  • Good liquid media resistance
  • For wet environments

from 0.72 USD / Pc.

8 of 8 articles ready for shipping in 24 - 48 h
To the product page