iglidur® Q290 | for medium to heavy duty, especially on soft shafts
iglidur® Q290 shows outstanding service life in robust swivel applications, as they are frequently found in some agricultural machinery, especially on "soft" shafts (e.g. galvanised). The wear on the shafts is minimal. Typical application areas AgricultureConstruction machinery
You can find further applications here:Industry solutions
Use our filter options to find the suitable product Tolerances and measurement system
|When to use it?|
- If a long-lasting bearing is required for robust
operating conditions (agricultural equipment, construction machinery, etc.)
with medium to high dynamic loads
on "soft" shafts
|When not to use it?|
- When permanently high static loads greater than 55 MPa occur.
iglidur® G, sleeve bearing with flange, mm
iglidur® Q2, sleeve bearing with flange, mm
iglidur® Q, sleeve bearing with flange, mm
- If an extremely wear-resistant bearing is needed
on "soft" shafts for minor loads.
iglidur® J, sleeve bearing with flange, mm
iglidur® J3, sleeve bearing with flange, mm
- When temperatures are continuously higher than +140 °C.
iglidur® J350, sleeve bearing with flange, mm
iglidur® Z, sleeve bearing with flange, mm
The installation dimensions and tolerances of iglidur® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be designed with a minimal bearing clearance. The rule for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.Testing methods Assembly
iglidur® plain bearings are press-fit bearings. The inner diameter adjusts only after press-fitting in the correctly toleranced housing. The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearing. Axial or radial movement in the housing are prevented this way.iglidur® - assembling, gluing, machining
Certificates and standards