RX e-tubes - innovative and extremely swarf-resistant

The problem solver for energy supply systems in the swarf area - available in 4 sizes. Chips and dirt can significantly impair the service life of cables and hoses. With the RX system, igus® offers an extremely tight, yet very easy-to-open plastic e-tube.

openable along the outer radius
Smooth, curved outer contour prevents chips from being deposited
Moulded "sealing lips" all round
No openings, gaps or undercuts
RX40 series is IP40 tested (TÜV Saarland)
Interior separation and support tray available
Concealed bolt/bore connection and stop-dog
"Reverse bend radius" version available with bend radius on both sides

Typical industries

Machine tools
All applications in the direct chip area
Applications exposed to dust and dirt
General mechanical engineering

RX e-tube dimensions and technical data

RX32

inner height hi: up to 42 mm
inner width Bi: 80 mm
bend radius R: 80 - 250 mm
pitch: 32 mm

To the RX30

RX40

inner height hi: up to 52 mm
inner width Bi: 100 mm
bend radius R: 100 - 300 mm
pitch: 40 mm

About the RX40

RX48

inner height hi: up to 62 mm
inner width Bi: 120 mm
bend radius R: 120 - 325 mm
pitch: 48 mm

About the RX48

RX56

inner height hi: up to 73 mm
inner width Bi: 140 mm
bend radius R: 140 - 350 mm
pitch: 56 mm

About the RX56

High-temperature plastic option of the swarf-resistant RX e-tubes - 850°C

Against hot chips
The extremely dense plastic pipe from igus® is now available as an HT version. Thanks to the special material, hot chips up to 850°C cannot adhere. The chip-repellent "round" and completely closed design make this series the perfect pipe for direct chip applications. The highlight: Although completely closed, it can be opened and easily filled in the outer radius.

Temperature-resistant against chips with temperatures up to 850°C, no adhesion of hot chips

Openable along the outer radius

No openings, gaps or undercuts

IP40 tested (TÜV Nord) - RX40

Smooth, curved outer contour - chips do not stick

Interior separation and support tray available

Areas of application: Machine tools, machining, general mechanical engineering

Test: 20 g of hot swarf (200 to 850 °C) applied to various materials. The graph shows the amount of swarf burnt in. Test winner: igumid® HT up to 850 °C.