e-skin® flat with support chain SKF.S

Part No.	Outer width Ba	Outer height Ha	Bend radius R
SKF.S.08	8mm	8mm	40 / 70 / 100mm
SKF.S.10	10mm	10mm	125mm

To the e-skin flat configurator

SKF.S.10.055.01.0 e-skin® flat with support chain

Greater dynamics

The new e-skin® flat with support chain with a radius of 55mm has been added to the radius portfolio. As it uses bolts, it can also meet increasingly challenging application conditions and is easier to assemble. The e-skin® flat with support chain is also simpler to extend and shorten. The support chain is guided in the e-skin® flat POD SKF12C and can be integrated into the existing structure of the mounting brackets.

Part No.	Inner height [mm]	Outer height [mm]	Bend radius [mm]	Pitch [mm]	Spacer mounting bracket
SKF.S.10.055.01.0	10	10	55	30	SKFC.SP20

SKF.S.10.125.01.0 e-skin® flat with support chain

Part No.	Inner height [mm]	Outer height [mm]	Bend radius [mm]	Pitch [mm]	Spacer mounting bracket
SKF.S.10.125.01.0	10	10	125	30	SKFC.SP20

SKF.S.10.125.01.0 support chain for the e-skin flat

Compare the SKF.S.08 and the SKF.S.10

Tech up

Cleanroom-compatible according to IPA Cleanroom Class 1, also for 3-layer e-skin flat
Available in 2 versions: Closed and openable with a special locking system
Can be combined with SKF12C and SKF15
Stackable, variable-width mounting brackets
Modular and compact design
Defined bend radius for applications with the e-skin flat
Profile for cleanroom applications with compact installation spaces
e-skin flat as a support chain with enclosed e-chain to prevent abrasion

Cost down

Monitoring of sag via ultrasonic measurement with replacement recommendation - optional with the i.Cee EC.S add-on module
Individual cables can be replaced quickly without having to change the entire energy supply system
Can be individually shortened or widened
No minimum purchase quantity
Flexible standard modular system, no special production
IPA ISO Class 1 chainflex cables with 36-month guarantee

Proof

IPA Cleanroom Class 1 for the 3-layer e-skin flat: Material/stranded structure* tested by IPA according to ISO 14644-14, report IG 2107-1242

*The following cables are listed in the certificate: CFCLEAN3.01.05.02 and CAPU.A.06.0 - further tests are currently not planned.

Sustainability

Have your energy chain recycled at the end of its life cycle in the igus Chainge® recycling programme.

Suitable accessories

Spacer

Spacer for the mounting bracket. Compact design due to mounting bracket's lower height. Now available in 3 sizes: SP12, SP16 and SP20.

e-skin® flat with support chain with ultrasonic sensor

e-skin® flat with support chain and ultrasonic sensor

i.Cee EC.S - new ultrasonic sensor on e-skin® flat with support chain enables condition-based maintenance messages in the cleanroom.

e-skin flat SKF.S offers an unsupported length and a defined bend radius.

SKF.S e-skin® flat with support chain for the closed SKF12C single pod.

Variable width e-skin mounting brackets available on request. If desired, they can be stacked.

e-skin® flat with support chain as enclosed solution to prevent abrasion

e-skin flat single pods

Freely fillable cable guidance system. Particularly compact structure. Modular design with profiles that can be joined together.

More e-skin series

Reliable and abrasion-resistant cable guidance in cleanrooms.

Go to e-skin overview

Cleanroom energy chains

Discover more energy chains suitable for ISO Class 1 cleanroom applications here.

To the cleanroom energy chains

e-skin flat application example

Linear system with air bearings

igus e-skin flat SKF12.4.03.1.01 used in a linear system with air bearings. The e-skin flat has no minimum order quantity, shows almost no visible wear and can be implemented in the smallest of installation spaces.

Learn more