With softer material, smaller installation height <200mm, flexible
filling and can be shortened as necessary
Typical application areas: cleanroom applications with small installation spaces, short travels, semiconductor production, LCD/LED panel production
|Part No.||Inner height||Outer height||Inner width||Outer width||Bend radius||Unsupported|
|SKS20.033.02.1||20 mm||25 mm||33 mm||50 mm||≥ 40mm||upon request||Request|
|Part No.||Inner height||Outer height||Inner width||Outer width||Installation height||Pitch|
|SKS28.068.02.1||28 mm||40 mm||68 mm||95 mm||<200mm||7 mm||Request|
Drawing e-skin SKS28
A = Moving end
B = Fixed end
The interior separation system of the igus e-skin consists of individual separators and shelves, which can be inserted in the e-skin in a variety of way and attached to the ridges.
|SK28.1.01 - Separator, slotted - unassembled||Request|
|SK28.1.1.01 - Separator, slotted - assembled||Request|
|110.63.1 - Full-width shelf - unassembled||Request|
|111.63.1 - Full-width shelf - assembled||Request|
With the interior separation configurator for the e-skin corrugated tubes, you can create filling variants in just a few seconds and configure complete e-skin corrugated tubes with interior separation and mounting brackets.
You are interested in our e-skin soft, but would like to see it yourself first before making a final decision?
1 Mounting brackets: strong, with integrated strain relief
2 Small installation space: small bend radii
3 Unsupported application due to stop-dogs on the upper shell of the e-skin
4 Cleanroom ISO Class 1: Virtually no wear or abrasion
5 Cable-friendly: defined minimum bend radius
6 Easy to assemble: Upper and lower shells can be opened for easy filling
Corrugated hoses have the same bend radius along their entire length
The e-skin consists of two shells (upper/lower shell). The shells can be configured in order to define the nature of the movement involved
Corrugated hoses have little or no inherent rigidity.
e-skin is suitable for short unsupported lengths in a small installation space (2) and has a defined bend radius (5)
Very little if any stability in respect of forces acting on the sides
Lateral stability thanks to the oval (6) geometry of the e-skin
Corrugated hoses cannot be used unsupported
e-skin supports itself and can be used for short, unsupported lengths
Corrugated hoses for dynamic applications cannot be opened
e-skin can be opened on its outer radius and filled quickly
The interior of corrugated tubes cannot be divided into sections
e-skin can be fitted with interior separation system
Developed for cleanroom applications, the e-skin has been tested under real conditions with 6.4 million double strokes at 3m/s in the laboratory.
The standard bending tests show how flexible the e-skin soft is. It only bends, even under loads that would break other energy chains.
This test shows how quiet 'e-skin' corrugated tubes and 'e-skin flat' cleanroom cables are. Compared to flat ribbon cables of competitors, the noise level of the e-skin flat is only 29dB(A).