My contact person
igus® Ltd.

Caswell Road

Northampton, NN4 7PW

01604 677240

Plastic rod - iglidur®

Wear problems are solved quickly and cost-effectively with a large selection of bar stock products from igus®. They are long-lasting and their shape can be adapted individually. Plastic bar stock products made of iglidur® material do not need any additional lubrication and are maintenance-free. They have been specially developed for dynamic applications, have low coefficients of friction and are very hard-wearing. This substantially lengthens the service life of your application. iglidur® bar stock products are available as round rods, tubes or plates of different lengths. Upon request, they can be machined if special shapes are needed. Depending on the application, different iglidur® materials with specific properties can be selected. For example, there are iglidur® plastic bar stock products that withstand temperatures up to +250 °C or have been certified for food and drinking-water applications.

Products

Filter

Core Requirements
Requirements
Material

Number of products: 27

iglidur® J, round bar
  • Low wear against a lot of shaft materials
  • Low coefficients of friction during dry operation
  • Vibration dampening
  • Good resistance to chemicals
  • Best performance with soft shaft materials
  • Low moisture absorption

from 10.30 USD/m

16 different sizes available.
Ready for shipping:
14 in 5 working days
To the product page
iglidur® A180, round bar
  • Complies with food and drug administration (FDA) regulations for repeated contact with food
  • Good media resistance
  • For wet environments
  • High wear resistance

from 9.91 USD/m

11 different sizes available.
Ready for shipping:
9 in 5 working days
To the product page
iglidur® M250, round bar
  • Excellent vibration dampening
  • Resistant to edge loads
  • High impact resistance

from 28.82 USD/m

7 different sizes available.
Ready for shipping:
5 in 5 working days
To the product page
iglidur® X, round bar
  • Continuous operating temperatures from -100 to +250 °C
  • Extremely high chemical resistance
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • High compressive strength

from 82.19 USD/m

12 different sizes available.
Ready for shipping:
1 in 24 - 48 hours
To the product page
iglidur® A160, round bar
  • Compliant with EC regulation 10/2011 EC, FDA-compliant
  • High media resistance
  • self lubricating and maintenance-free

from 36.00 USD/m

9 different sizes available.
Ready for shipping:
6 in 5 working days
To the product page
iglidur® A181, round bar
  • For use with temperatures up to +90 °C
  • The food grade material, FDA and EC regulation 10/2011 EC compliant
  • Good media resistance

from 20.08 USD/m

8 different sizes available.
Ready for shipping:
1 in 24 - 48 hours
To the product page
iglidur® J4, round bar
  • Lubrication and maintenance-free
  • Low-cost material for mass production
  • Low coefficients of friction
  • Good media resistance
  • Low moisture absorption

from 22.00 USD/m

14 different sizes available.
Ready for shipping:
12 in 5 working days
To the product page
iglidur® J200, round bar
  • Very long service life with hard anodized aluminum
  • Low coefficients of friction
  • Low wear
  • For low to medium loads
  • Self-lubricating and maintenance-free

Upon request

3 different sizes available.
Ready for shipping:
3 in 5 working days
To the product page
iglidur® T220, round bar
  • Free from ingredients banned or unwanted by the tobacco industry
  • The material complies with food and drug administration (FDA) regulations

from 91.34 USD/m

4 different sizes available.
Ready for shipping:
3 in 5 working days
To the product page
iglidur® R, round bar
  • Very cost-effective
  • Good abrasion resistance
  • Low coefficients of friction during dry operation
  • Low moisture absorption

from 47.78 USD/m

6 different sizes available.
Ready for shipping:
4 in 5 working days
To the product page
iglidur® A350, round bar
  • For use with temperatures up to +180 °C
  • Comply with the requirements of the FDA
  • Available as iglidur® A350, Bar stock A350 and for injection moulding
  • For medium to high loads
  • Equally good for both oscillating and rotating applications
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Lubrication- and maintenance-free

from 38.02 USD/m

14 different sizes available.
Ready for shipping:
12 in 5 working days
To the product page
iglidur® GLW, round bar
  • Low-cost material for mass production
  • Applications with static loads
  • Cost-effective
  • Dirt-resistant
  • Resistant to vibrations

from 40.77 USD/m

2 different sizes available.
Ready for shipping:
1 in 5 working days
To the product page
iglidur® HSD350, round bar
  • Sterilisable
  • For continuous use up to +180° C
  • High media resistance
  • Corrosion-free
  • For wet environments
  • self-lubricating and maintenance-free

from 234.22 USD/m

 
Delivery time on request
To the product page
iglidur® Q2, round bar
  • Wear-resistant and dimensionally stable at high loads
  • Cost-effective
  • Lubrication and maintenance-free

from 122.99 USD/m

2 different sizes available.
Ready for shipping:
1 in 5 working days
To the product page
iglidur® J3, round bar
  • Specialist for pivoting and pulsating loads
  • Good media resistance
  • Low moisture absorption
  • PTFE-free

from 18.68 USD/m

9 different sizes available.
Ready for shipping:
7 in 5 working days
To the product page

Consulting

Photo
Alan Hicks

Plastic rod/Bar stock

Write e-mail

Shipping and consultation

In person:

Monday to Friday from 8am - 8pm.
Saturdays from 8am- 12pm.

Online:

24h