Please choose your delivery location

The selection of the country/region page can influence various factors such as price, shipping options and product availability.
Contact
igus® Ltd.

Caswell Road

Northampton, NN4 7PW

01604 677240
GB(EN)

Shop energy chain accessories online

Number of products: 14

Strain relief elements

Strain relief clamps, tiewrap plates and modular plug-in strain relief elements.

Guide troughs for long travels

From the lightweight and universally deployable "Super Alu" guide trough through to the simple and cost-effective snap-in trough.

PPDS - Push/Pull Detection System

  • Easy installation, non-interchangeable connectors
  • Easy programming using the keypad directly at the device
  • Compact housing, corrosion-resistant and with EMC protection
  • The force limit is programmed in tensile and compression directions

smart plastics - intelligent sensor technology for predictive maintenance of energy chains

Eliminate unplanned downtime and reduce maintenance costs with smart plastics:
  • i.Sense - Condition monitoring
  • i.Cee - Predictive maintenance

Assembly tools for energy chains

Simple opening and closing of chain links and big time savings in assembly.
from £ 29.18/Pc.
13 different sizes available.
Ready for shipping:
12 usually shipped within 8 working days
To the online shop

e-rib: corrugated tube reinforcement

The reinforcement for existing corrugated tube systems.  Easily retrofittable, little installation space required and stability against unwanted sideways movement.
from £ 2.61/Pc.
4 different sizes available.
Ready for shipping:
2 usually shipped within 8 working days
To the online shop

Trough clip

Energy supply for static cables. Trough clip, guides cable along the guide trough
from £ 3.87/Pc.
1 different sizes available.
Ready for shipping:
1 usually shipped within 8 working days
To the online shop

Chain opener for the E2/000

  • Reduce the assembly time to open the chain from 33 sec. to 2 sec. (Tested series 2700.07)
  • For E2/000 product range (2400/2500, 2600/2700, 3400/3500)
  • Open and close a long piece of e-chain® in one go
  • See assembly instructions
from £ 55.34/Pc.
4 different sizes available.
Ready for shipping:
2 usually shipped within 8 working days
To the online shop

Office e-chain OCR | Mounting brackets

  • Simply attach with block magnets
  • Diameter ø 35mm
  • Complete set includes:
    • Moving end OCR.500.1
    • Fixed end OCR.500.2
from £ 18.03/Pc.
1 different sizes available.
Ready for shipping:
1 usually shipped in 2 working days
To the online shop

Office e-chain ZF14 | Mounting brackets, plastic, one-piece

  • Width index 38mm
  • A: 51.6mm
  • B: 50mm
from £ 5.81/Pc.
1 different sizes available.
Ready for shipping:
1 usually shipped in 2 working days
To the online shop

Chain opener for the E2.1 system

  • Opening of long e-chain sections in one go
  • Opening time reduced by a factor of 16 (from 33 to 2 seconds for a 1 m piece)
  • Versatile assembly tools for the E2.1 series
  • Less force is needed if these tools are used
  • See assembly instructions
from £ 60.79/Pc.
6 different sizes available.
Ready for shipping:
6 usually shipped within 8 working days
To the online shop

chainfix clamps for pneumatic hoses CFX12.X.P | With pneumatic double troughs | Cable diameter 04mm/08mm

  • For hose diameters 4 and 8mm
  • High holding force due to "all-round" grip
  • The cross section of pneumatic hoses is fully retained
  • No crushing of the hoses, and therefore no loss of hose length
  • Good price-performance ratio
from £ 11.56/Pc.
16 different sizes available.
Ready for shipping:
16 usually shipped within 8 working days
To the online shop

chainfix clamps for pneumatic hoses CFX16.X.P | With pneumatic double troughs | Cable diameter 06mm / 10mm / 12mm

  • For hose diameters 4 and 8mm
  • High holding force due to "all-round" grip
  • The cross section of pneumatic hoses is fully retained
  • No crushing of the hoses, and therefore no loss of hose length
  • Good price-performance ratio
from £ 11.56/Pc.
26 different sizes available.
Ready for shipping:
26 usually shipped within 8 working days
To the online shop

Office e-chain OCR | Intermediate bracket

  • The OCR can be mounted at defined distances using the intermediate bracket
  • The intermediate bracket allows points of the e-chain® to be attached to metallic surfaces with magnetic clips
from £ 9.79/Pc.
1 different sizes available.
Ready for shipping:
1 usually shipped in 2 working days
To the online shop

Energy chain accessories

Energy chain accessories. igus® has a wide range of energy chain accessories to support your energy supply system. For example, trough systems, strain relied clamps, tiewrap plates and modular plug-in strain relief elements. Use our assebly tool as an energy chain accessory with simple opening and closing of chain links.

Consulting

I would be happy to answer your questions

Shipping and consultation

In person:

Monday to Friday from 8am - 8pm.

Online:

24h


The terms "igus", "Apiro", "chainflex", "CFRIP", "conprotect", "CTD", "drylin", "dry-tech", "dryspin", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-skin", "e-spool", "flizz", "ibow", "igear", "iglidur", "igubal", "igutex", "kineKIT", "manus", "motion plastics", "pikchain", "readychain", "readycable", "ReBeL", "speedigus", "triflex", "robolink", "xirodur", and "xiros" are legally protected trademarks of the igus® GmbH/ Cologne in the Federal Republic of Germany and where applicable in some foreign countries.

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM,Parker, Bosch Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mention on this website. The products offered by igus® are those of igus® GmbH