iglidur® F2, sleeve bearing with flange, mm

iglidur® F2 | ESD-suitable, wear-resistant and dissipative
iglidur® F2 helps to avoid electrostatic charging. Good media and temperature resistance, suitable even in wet conditions due to low moisture absorption and good universal wear values in a wide range of applications.

Typical applications

Machine tools
Robotics

Find more applications here:
Industry solutions

 

When to use it? When the bearing should be electrically discharging When a universal bearing is required

When not to use it? When a universal bearing without static dissipation capability is required iglidur® G, sleeve bearing with flange, mm iglidur® P, sleeve bearing with flange, mm For underwater use iglidur® H370, sleeve bearing with flange, mm When extreme wear resistance is required iglidur® J, sleeve bearing with flange, mm iglidur® W300, sleeve bearing with flange, mm

Use our filter options to find the suitable product

Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® plain bearings depend on the material and wall thickness. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be installed with a smaller bearing clearance. The rule for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Testing methods

Assembly
iglidur® plain bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing hole. The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearings. Axial or radial movements in the housing are thus reliably avoided.
iglidur® - assembling, gluing, machining