iglidur® A350 | The endurance runner at higher temperatures in the food sector - Compliant with EU regulation 10/2011
- FDA-compliant
- Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
- For use with temperatures up to +180 °C
- For medium to high loads
- Equally good for both oscillating and rotating applications
- Lubrication- and maintenance-free
- Standard range from stock
iglidur® A350 plain bearings are made for practically all loads in the food and packaging industry. Even high loads, often seen in lifting equipment or presses, are accommodated easily and the bearings work flawlessly without any additional lubrication.
Typical application areas
Food industryBeverage industryMedical technology You can find further applications here:
Industry solutions When to use it?- When FDA-compliance is required
- If wear-resistance and FDA conformance are necessary at high loads
- If the bearing is used in an acid environment
| When not to use it?- When temperatures are continuously greater than +180°C
iglidur® A500, sleeve bearing, mm - When the maximum wear resistance is necessary
iglidur® J, sleeve bearing, mm - When a cost-effective FDA bearing is required
iglidur® A200, sleeve bearing, mm iglidur® A180, sleeve bearing, mm - For high speeds
iglidur® J, sleeve bearing, mm
|
Use our filter options to find the suitable product Tolerances and measurement systemThe installation dimensions and tolerances of iglidur® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be designed with a minimal bearing clearance. The rule for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Testing methods Assemblyiglidur® plain bearings are press-fit bearings. The inner diameter adjusts only after press-fitting in the correctly toleranced housing. The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearing. Axial or radial movement in the housing are prevented this way.
iglidur® - assembling, gluing, machining
Certificates and standards