The small drylin® N low profile linear guide system consists of a rail and a guide carriage. The sliding elements are manufactured from a high-performance polymer. The low profile linear guide was developed especially for applications with very little installation space. It moves completely without any lubricant, guaranteeing compliance with the highest hygiene standards.
You can use the drylin® linear guides expert to quickly and easily configure an individual linear guide for your application in just five steps.
Low profile guides are low profile linear rails designed to suit small spaces.
You can use drylin® N low profile linear guides in small installation spaces with fairly low loads.
drylin® is lubrication-free, maintenance free, silent running and smooth operational.
drylin® N low profile linear guide systems are deployed particularly in places where the installation spaces are small while demands are high. The compact but tough design meets the highest demands with regard to precision and flexibility. The various widths for the guides and the wide range of guide carriages provide a great variety of application options.
The LOV3 delta 3D printer from PEL3O has been designed for both commercial and private use. The goal here was to address the creative mind. The 3D printer from PEL3O operates quickly and reliably with drylin® N, without the need for maintenance.
Two conventional cameras are set up at an angle on a low-profile guide system to create a three-dimensional image. This trick renders an expensive 3D camera unnecessary. For this to work properly, the slight difference in the alignment of the cameras must remain identical at all times. This is made possible by a drylin® N low-profile guide system.
In this packaging machine, a gripper lifts and packages bottles. The fingers of the gripper are moved by means of a low-profile guide system. No soiling by lubricants such as oils or greases may occur at this critical point in the machine. For this reason, only one solution came into question – drylin® N.
By means of a vacuum gripper test parts are removed, measured and taken to various magazines. The removal unit is moved along the X-Y axis using the space-saving and cost-saving drylin® N low-profile guide system. The robust TK-04 guide system takes on vertical guidance.