My contact person
igus® Ltd.

Caswell Road

Northampton, NN4 7PW

01604 677240

iglidur® J260-PF, filament for 3D printing

  • Maximum service life of the tribo-filaments 
  • Very good coefficient of friction for low or medium loads
  • Higher temperature resistance up to 120°C
  • High-quality processing: suitable for experts
Product description
Wear-resistant filament with higher temperature resistance iglidur J260-PF
 
iglidur J260 is available as injection moulded, bar stock and 3D printed material (filament) and shows very similar friction and wear specifications in all manufacturing processes. It is therefore a reliable material for product development from prototype up to high volume production. It has the best coefficient of friction and wear of the tribo-filaments, as well as an increased long-term temperature resistance of 120°C.  But it is also much more demanding to process: the printer should be able to achieve an extrusion temperature of 280°C and a printing bed temperature of 120°C, and ideally have a heated installation space. Without a heated installation space, only smaller components can be printed.
 
When to use it?
  • If the wear resistance of iglidur I150 or iglidur I180 is not sufficient
  • When a higher application temperature of up to 120°C is required.
  • From prototype to series: the same material for 3D printing, bar stock and injection moulding
When not to use it?
  • If your existing 3D printer does not have a build chamber heater (→ iglidur I180-PF)
  • When mechanical properties are very important in addition to abrasion resistance (→ iglidur I180-PF, iglidur iglidur I150-PF)
  • When complex parts have to be produced
Technical data
Accessories
Downloads

Consulting

I would be happy to answer your questions personally

Shipping and consultation

In person:

Monday to Friday from 8am - 8pm.

Online:

24h